2x 7 inch 280W CREE SPOT LED Driving Lights Round Offroad 4x4 Car Spotlights Red
- THE PURPOSE OF SPOTLIGHTS - EX Series includes Spotlights in different colors and sizes. We aim to improve your vision over the original vehicle high beams by providing a perfect blend of lighting distance as well as side to side reach.
- HIGHER LUMINOUS EFFICACY - In order to produce higher level of effective lumen at a longer distance, LUXEON TX LED Chips are equiped to deliver high efficacy with high flux density to enable tight beam control in directional and high lumen applications.
- FULLY PREPARED FOR IMPACT - Plexiglass strenghened lens surface, protect components from direct damage and scratch-proof. Higher light transmission rate than PMMA lens and further reduce of optical loss. Unbreakable toughened rims and powder coated stainless steel with well supported structure. No more fear to vibration and dirct impact.
- 1-STEP BEAM TYPE SWITCH - Two types of PMMA covers provided (clear & flood) for the lights to easily adapt different applications. Optical tested flood covers re-distribute light beam evenly on the horizon while eliminating glare for oncoming traffic
- PLUG AND PLAY - One set of 2-way water-sealed DT wiring harness is included which protects the vehicle electronic system from shortcircuit or even fire caused by unsecured or improper wiring. Also it makes wiring much easier for future replacing or upgrading.
- EX Series is designed to provide drivers total visibility covering all frontal blind spots of the factory high beams. It also gives drivers options to switch the light beam freely to gain better side and shoulder illumination.
- In order to produce satisfied amount of lighting power out of the spotlights, we equiped this series with LUXEON TX LEDs from LUMILEDS, which allow system optimization by blending the perfect combination of high efficacy (164LM per-watt) and low energy consumption
- 15 pieces of alu-firm powder coated thermal fins created an unmatched heat dissipation area of over 0.4 M虏, over 700% thermal efficiency ensuring a best working temporature for LEDs to produce highest lumen output.
- With the exchangable covers, the light beam can be easily changed between hyper spot beam which shines over 800 meters and 30掳 flood beam which provides excellent roadside visibility. They also offer additional protection for inner lens.
- Dimensions: 7.10*2.95*7.48Inch (L*W*H)
- Operating Voltage: DC 9-32V (fit all 12V/24V vehicles)
- Luminous Efficacy: 164LM/W
- Total Output: 280W & 45920LM
- Lux Reading: 1Lux @ 731M
- Light Transmission Rate: 97%
- Waterproof Rate: Submersible to 5 Meters
- LED Count: 28pcs LUXEON TX LEDs
- Housing Finish: Black Color Powder Coated
- Rim Color: Claret Red
- Color Temperature: 6500K Pure White
- Housing Material: Toughened Aluminum Profile
- Mounting Bracket: Powder Coated Stainless Steel
- Beam Angle: 5芒鈧溍偮?(spot beam) / 30芒鈧溍偮?(flood beam)
- Life Span: 50000+hours
- Working Temperature: -40_ 芒鈧€?~ 125_ 芒鈧€?/span>
5 Years Warranty
- 2X 7inch Black Ring LED Spotlights
- 2X Mounting Brackets
- 2X Screw Sets
- 1X Two-Way DT Connector Wiring Harness
Unless otherwise stated, we offer a 12 month warranty on all products from the date of purchase. It cannot be excluded under the Australian Consumer Law. The warranty period for commercial use is 3 months.
You are entitled to a replacement or a full refund for a major failure of our product. You are also entitled to have goods repaired or replaced if the goods fail to be of acceptable quality.
Our warranty cover does not include damage caused by normal wear and tear, accidents, misuse, neglect, and lack of maintenance, use of incorrect voltage, power surges, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories, natural disaster, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions.